Product Categories

Join Our Newsletter

Receive updates and latest news from Echo Process Instrumentation.


Pump Control
You're at: Products > Pump Control

Sort :
Level Hunter III and LXD Transducer
Level Hunter III and LXD Transducer

The Level Hunter III provides non-contacting ultrasonic level measurement and alarm control with the latest ECHO LOGIC algorithms and advanced microprocessor technology with DSP Processing. It can accurately measure level and volume (pre-configured tank shapes) and perform alarm and fixed pump control for up to 6 pumps. Standard features include: 1 4-20mA output, 4 SPDT Relays, LED's for alarm/pump status and 6 button Quick Setup programming. The LXD Transducer series comes in ranges of 5, 10, 15 meter ranges.

View Products
The Bullet - Ultrasonic Level Measurement
The Bullet - Ultrasonic Level Measurement

The Bullet provides non-contacting ultrasonic level measurement with the latest digital echo processing for superb performance. It is an all-in-one Loop-powered (2-wire) ultrasonic transmitter with 4 buttons for easy programming. It comes standard with a 2" NPT threaded PVDF housing for simple mounting requirements. Accuracy is +/- 0.2% of range. Two models are available for 7 or 10 meter ranges.

View Products
Air Transducer - Ultrasonic Level Transducer
Air Transducer - Ultrasonic Level Transducer

ECHO'S newest product THE AIR TRANSDUCER is a smart ultrasonic level transmitter. It has 5 modes of operation: level, distance, OCM flow, volume and pump control. It comes in 2 models, 3m (10 ft) and 10m (33 ft) ranges with 2 SPDT relays, 2 Modbus RTU RS-485 terminals and 1 4-20mA output. Pricing available! Call one of our helpful sales engineers for product and application details! 850-609-1300

View Products
Oyster 700 Series - Submersible Pressure Transducer (SS Cage not included)
Oyster 700 Series - Submersible Pressure Transducer (SS Cage not included)

The Oyster 700 Series provide accurate and reliable level measurement with the latest miniature microprocessor technology built right in the submersible pressure transducer. The transmitter contains a piezo-resistive sensor that outputs a signal proportional to the hydrostatic pressure on the diaphragm. This signal is compared to the atmospheric pressure via the vent tube and compensated to the water temperature for years of maintenance-free operation (no periodic calibrations needed).

View Products
Process Meter 9300 Series
Process Meter 9300 Series

Low-cost Alarm & Pump Controller. Displays level or volume with any analog or voltage input. It can control and alternate up to 4 pumps with SPDT Relays. Has a 24 VDC power supply to utilize 2-wire instruments.

View Products