Display: Top 0.6″, Bottom 0.45″ Ht, red LED, 6 digits (-999999 to 999999), 8 Intensity Levels
Front Panel: NEMA 4X, IP65; panel gasket provided with four front panel buttons
Password: Restricts modification of programmed settings
Non-Volatile Memory: Settings stored for a minimum of 10 years
Power Options: 85-265 VAC, 50/60 Hz; 20 W max or 12-36 VDC; 6 W max
Required Fuse: UL Recognized, 5 A max, slow-blow
Isolated Transmitter: 5, 10 or 24 VDC selectable via jumper, 700Ω max
Operating Temperature: -40 to 150ºC
Storage Temperature: -40 to 185ºC
Connections: Removable terminal blocks accept 12-22 AWG. Note: RJ45 external I/O only
Panel: 1/8 DIN, high impact plastic, 94V-0, color; gray, weight = 9.5 oz (269 g)
Mounting Cut-out: 1/8 DIN panel cutout required 3.622″ x 1.772″ (92 x 45mm). Brackets included
Dimensions: 2.45″ x 4.68″ x 5.64″ (62mm x 119mm x 143mm), W x H x D
Inputs: Field selectable: 0-20 mA, 4-20 mA, 0-5 VDC, 1-5 VDC, 0-10 VDC
Accuracy: ±0.03% FS ±1 count, Linear, square root, exponent, horizontal tank volume, 32 pt DIY Table
Calibration Range: User programmable over entire range of meter, up to 5 decimal places
Relays: 0, 2 or 4 SPDT Form C, rated 3A @ 30VDC and 125/250 VAC
Relay Operation: Pump, Alteration Control, Automatic (non-latching), Latching, Sampling (based on time).
Time Delay: 0 to 999 seconds, on and off relay time delays, each relay is programmable separately
Fail-Safe: Programmable and Independent for each relay.
Analog Output: 1 Isolated 4-20mA Output, 0.1% FS accuracy
Typically used as a remote display with our low-cost Bullet (Loop-powered ultrasonic level transmitter) or our Oyster (Submersible pressure transducer).
Advice & FAQ
1. Yes, it has a built-in 24VDC power supply for loop-powered level or flow meters.
2. Yes, it can display any units of measurement like ft, in, m, cm, mm.